Plane Old Wood
 
This was the very first thing we made on the Jet lathe when we first got it. It was for a school contest and she won second place. she did not get first since she could not do all the work herself. It is getting a little beat-up after 2 years and needs a new paint job.

It is just a couple of 2x4s glued up and then turned on the lathe for the tip and the cape and the body is a piece of PVC pipe.  My daughter said it needed a flat spot on the tip or it just looked like a bullet so I ran it over the jointer a few times.  

Picture
Picture


3/14/2013 05:23:10

I give you my "Like" for this fresh post about the pomade

Reply
4/18/2013 00:45:28

Hi! If necessary, the other board members may need to remove the board member from the President’s Office. Removal from an office can be done by the board, but the member cannot be removed from the board, without unit owner approval.

Reply



Leave a Reply.